Product Range

Need help?

Office: +44 1624 890250

Mobile: +44 7624 304555

Email: [email protected]

Contact Us

Parklift

Versatile and durable, Parklift is available in more than ten basic configurations – including two and three-level, single and double-width variants.

With a number of weight capacities and finish options, the low-maintenance, cost-effective Parklift system is ideal for virtually any application, both indoor and outdoor.

We work with our clients in the initial stage to understand the requirements and objectives of the project.

ParkLift Product Variants

Parklift 450

The new Parklift 450 also offers maximised installation dimension flexibility. Here the trend is to shift away from the rigidly set, 15 cm clearance increments in as far as the pit-depths are concerned and to move toward increased clearance flexibility. In fact, the newly designed pit depths provide for 5 cm clearance increments.

Compared to predecessor models, the Parklift 450 furthermore features a clear ceiling height that is 5 cm less, without any reduction to the usual vehicle heights. How does this come about? The previous models feature an elevated platform for drainage of the water accumulating in the relative parking spaces, where the water drains down from the platform into drainage channels. The newly developed systems have done away with the elevation and have resolved the drainage issues by slightly sloping the platform giving it a minimal, 2 % inclination. The single systems are engineered for 2 cars, the double systems for 4 cars.

  • Mechanically-driven car parking system
  • Clear ceiling height reduced by 5 cm
  • Pit depths and platform clearances now in 5 cm clearance increments
  • Car heights of 150 cm – 205 cm possible
  • Platform width of up to 270 cm still possible for the single systems
  • Platform width of up to 540 cm still possible for the double systems
  • 2,000 kg and 2,600 kg platform load
  • CLASSIC PROFILE made of galvanized trapezoidal sheet metal, higher-quality versions (SMART PROFILE 2.0 and ALU PRIME PROFILE) are available
  • 1 driving aisle = 2 parking levels = cost savings
  • Independent parking processes
  • Minimised maintenance costs
  • Maximised operational and functional system safety (German TÜV tested, CE compliant)

Parklift 405

The new Parklift 405 enters the market with the same innovations as the Parklift 450 and also has a further advantage. With even lower ceiling height, the same-sized vehicles can be parked as in the Parklift 450, while the lower parking space is inclined. This is a response to growing car dimensions and shrinking space size.

The lower platform is accessible with a gradient of 14 %. The upper platform has a minimum inclination of 2 %, which helps with drainage of the upper parking space. The single system is for 2 cars, the double system for 4 cars.

  • Mechanically-driven car parking system
  • Clear ceiling height reduced by 5 cm
  • Pit depths and platform clearances now in 5 cm clearance increments
  • Car heights of 150 cm – 205 cm possible
  • Platform width of up to 270 cm still possible for the single systems
  • Platform width of up to 540 cm still possible for the double systems
  • 2,000 kg and 2,600 kg platform load
  • CLASSIC PROFILE made of galvanized trapezoidal sheet metal, higher-quality versions (SMART PROFILE 2.0 and ALU PRIME PROFILE) are available
  • 1 driving aisle = 2 parking levels = cost savings
  • Independent parking processes
  • Minimised maintenance costs
  • Maximised operational and functional system safety (German TÜV tested, CE compliant)

Parklift 340

Offering reduced height dimensions, both platforms of the Parklift 340 are accessed/exited at an incline. Platform inclination is 5°/9 % and offers still parking for cars with standard low suspension. Single unit for 2 cars and double unit for 4 cars.

  • Pit depth of 155 cm only
  • Reduced clear height of 295 cm or 305 cm
  • Platform width up to 270 cm and 500 cm
  • Platform load 2,000 kg
  • Doubled parking places in the available space
  • 1 driving level = 2 parking levels = cost savings
  • Independent parking
  • Low maintenance cost
  • High level of operational and functional safety (German TÜV tested, CE compliant)

Parklift 401

When the going gets tighter dependently stacked parking systems are offered. With the Parkbox 401 the lower car has to be removed to use the upper platform. Subject to headroom availability and inclined platform, the Parkbox enables doubling of parking space, without any need for a pit. Single unit for 2 cars above each other.

  • Car heights 150-170 cm, corresponding to available headroom
  • Platform width 220 cm
  • Platform load 2,000 kg
  • Doubled parking places in the available space
  • 1 driving level = 2 parking levels = cost savings
  • Dependent parking
  • Lower places for visitors, upper places for permanent users
  • Ideal for car sharing, valet parking, car rentals, car service centers
  • Low wear, proven hydraulic technology
  • Low maintenance cost
  • Low construction cost, can be fixed at given concrete floor
  • High level of operational and functional safety (German TÜV tested, CE compliant)

Parklift 411

Dependent parking means: the lower car has to be removed to use the upper platform. If sufficient installation height is not given indoors, the Parklift 411 can ideally be suited to outdoor installation with a piece of additional equipment. A single unit for 2 cars and a double unit for 4 cars is available.

  • Car height at lower places 150-200 cm
  • Platform width up to 270 cm and platform load 2,000 kg and 2,600 kg
  • Platform width up to 500 cm and platform load 2,600 kg
  • Doubled parking places in the available space
  • 1 driving level = 2 parking levels = cost savings
  • Dependent parking
  • Lower places for visitors, upper places for permanent users
  • Ideal for car sharing, valet parking, car rentals, car service centers
  • Low wear, proven hydraulic technology
  • Low maintenance cost
  • Low construction cost, can be fixed at given concrete floor and ideal for retrofitting
  • High level of operational and functional safety (German TÜV tested, CE compliant)

Parklift 421

The Parklift 421 offers 3 car parking places on the surface of only 1 parking place. A compact solution where ever for retrofit additional car parking places are required and the parked cars can be manoeuvred. For a wider range of options, the systems are suitable to be installed either side by side or in rows behind one another or even outdoors. Single unit for 3 cars above each other.

  • Make 3 on 1 – 200 % more parking spaces
  • Platform width up to 270 cm and platform load up to 2,600 kg for SUVs
  • 1 driving level = 3 parking levels = cost savings
  • Dependent parking
  • Ideal for car sharing, valet parking, car rentals, car service centers
  • Suitable for open air installation
  • Low wear, proven hydraulic technology
  • Low maintenance cost
  • Low construction cost, can be fixed at given concrete floor
  • High level of operational and functional safety (German TÜV tested, CE compliant)

Parklift 403

Reduced headroom created by “tilting”: upper platform with horizontal access, lower platform sloped: 8°/14,1 %. If overall headroom is available, systems with higher clearances between platforms can be supplied. Single units for 3 cars and double units for 6 cars.

  • Car heights 150-170 cm
  • Platform width up to 270 cm and 500 cm
  • Platform load 2,000 kg
  • Tripled parking places in the available space
  • 1 driving level = 3 parking levels = cost savings
  • Independent parking
  • Low maintenance cost
  • High level of operational and functional safety (German TÜV tested, CE compliant)

Parklift 413

Three cars can park above each other on a little more than the footprint of one parking space. A cost saving solution with one driving level and three parking levels. All parking level are horizontally accessible. Single units for 3 cars and double units for 6 cars.

  • Car height 150-170 cm
  • Platform widths up to 270 cm and 500 cm
  • Platform load 2,000 kg
  • 1 driving level = 3 parking levels = cost savings
  • Independent parking
  • Low maintenance cost
  • High level of operational and functional safety (German TÜV tested, CE compliant)

Parklift 461

It is particularly in cities that the shortage of available parking spaces is consistently an issue. The invisible Parklift 461 accommodates 1 underground hidden car on a horizontal platform. The top platform is even when lowered down and can be integrated to the surrounding surface with different coverings. The Parklift 461 is suitable for courtyards, access areas or retrofit projects.

  • Car heights 165-200 cm
  • Platform width up to 270 cm and 500 cm
  • Platform load 2,000 kg and 2,600 kg
  • Additional, invisible parking places for retrofit projects
  • One parking level: single unit for one parking place, double unit for two parking places
  • The visible level system cover is flush with the surrounding ground and therefore can be driven over
  • The system cover can be designed individually, e.g. sand/marble, sand/grass stones, earth/grass or checker plate
  • Tight system cover protects the car parked below

Parklift 462

The invisible Parklift 462 will be lowered into a pit, while the horizontal platforms below ground get visible just when raised for access or exit. The upper platform can be integrated to the surrounding surface with different coverings. The Parklift 462 is suitable for courtyards, access areas or retrofit projects. Single unit for 2 cars and double unit for 4 cars.

  • Car heights 165-200 cm
  • Platform width up to 270 cm and 500 cm
  • Platform load 2,000 kg and 2,600 kg
  • Additional, invisible parking places for retrofit projects
  • Two parking levels
  • The visible top platform is flush with the surrounding ground and can be driven over
  • The system cover can be designed individually, e.g. sand/marble, sand/grass stones, earth/grass or checker plate
  • Tight system cover protects the car parked below

Parklift 463

The invisible Parklift 463 will be lowered into a pit, while the horizontal platforms below ground get visible just when raised for access or exit. The upper platform can be integrated into the surrounding surface with different coverings. The Parklift 463 is suitable for courtyards, access areas or retrofit projects. Single unit for 3 cars and double unit for 6 cars.

  • Car heights 165 cm
  • Platform width up to 270 cm and 500 cm
  • Platform load 2,000 kg and 2,600 kg
  • Additional, invisible parking places for retrofit projects
  • Three parking levels
  • The visible top platform is flush with the surrounding ground and can be driven over
  • The system cover can be designed individually, e.g. sand/marble, sand/grass stones, earth/grass or checker plate
  • Tight system cover protects the car parked below

Example Applications